CPL Glasses for Tattooing: A DIY Experiment

Reflections from studio lighting can make parts of a tattoo difficult to see. This DIY project explored an idea from photography: mounting circular polarizing filters in round glasses frames to see how they affected glare.

The setup used camera filters and round costume frames. The useful question was how much glare they could cut while still letting enough light through to work.

 

What a CPL filter does

A circular polarizing filter, usually shortened to CPL, can reduce some reflections from nonmetallic surfaces. Photographers rotate the filter to adjust its effect. The result depends on the light, the surface, and the viewing angle.

A polarizer also reduces the amount of light passing through it. Cutting a bright reflection may make a detail easier to see, while a darker overall view can make other details harder to judge. The effect needs to be considered under the lighting where it will be used.

Filters and frames

The parts listed for this project were a 52 mm phone CPL filter and round costume glasses frames. Check the filter and frame dimensions before buying. The diameter printed on a camera filter refers to its attachment size, so compare the actual measurements needed for the frame.

Keep the filter's rotation accessible when considering how it will sit in the frame. Its effect changes as it turns. Use appropriate protective eyewear for the work you do.

 

52mm CPL

 

Glasses

 

Check brightness as well as glare

Compare the view with and without the filters under the same studio lighting. Look at the bright reflections first, then check the darker areas and the appearance of the ink colors. Check each lens individually and both together. A reduction in glare is useful only if the overall view remains clear enough for the task.

For the photographic principle behind the project, see Nikon's explanation of polarizing filters. To ask about this studio project, contact Recycle Tattoo.

Previous
Previous

Our First Artist Meetup in Garden Grove